Adjusting The Rinse Aid Dispenser Setting; Adding The Detergent; Washing Programmes - Saba LVS13C45GZ17S Mode D'emploi

Adjusting the rinse aid dispenser setting

The factory setting for the dishwasher is 5 and you can choose among
6 settings�
The amount of rinse aid dispensed is proportional to the selector
position�
1� To adjust the rinse aid setting, remove the dispenser cap�
2� Rotate the rinse aid selector to the desired position�
3� Replace the cap and turn it clockwise�
Adjust lever (Rinse)
NOTE: The amount of rinse aid must be increased if the washed
dishes appear dull or feature circular stains� If the dishes are
sticky or have white streaks, it is necessary to reduce the rinse
aid setting�

Adding the detergent

GB
1� To open the detergent dispenser cap, gently press the release
button�
2� Add the detergent and close the cap�
54
A detergent for main wash cycle
B detergent for pre-wash cycle
NOTE: Use only detergent specifically
formulated for dishwashers� For
optimal washing results it is important
to use a good quality detergent�

Washing Programmes

Programme Degree of soil Cycle Description
For
Pre-wash
extremely
Main wash
soiled
(60°C)
crockery and
rinse 1
normally
Intensive rinse 2
soiled pots,
Hot rinse
pans, dishes,
Drying
etc�
Standard
daily cycle Pre-wash
for normal Main wash
* soiled loads, (46°C)
such as pots, Hot rinse
plates and Drying
glasses
For lightly
Pre-wash
soiled loads
Main wash
that need
(45°C)
no excellent
Light Hot rinse
drying
Drying
efficiency
Recommended
quantity of Washing Rinse
Energy Water
detergent time Aid
(Kwh) (L)
pre-wash / (min.) needed?
main wash
5/27�5 g
(or 3 in 180 1�30 16 Yes
1)
5/27�5 g
(or 3 in 199 0�92 11 Yes
1)
5/20 g
(or 3 in 137 0�85 14 Yes
1)
GB
55