8
Display
OptiHeat Control (3 step
Residual heat indicator)
WARNING!
is a risk of burns from residual
heat. The indicator shows the
level of the residual heat.
DAILY USE
WARNING! Refer to Safety
chapters.
Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the hob
again.
• you use incorrect cookware. The
symbol
comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the hob
deactivates.
Description
Automatic Switch Off operates.
/
/
There
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 3
4 - 7
8 - 9
10 - 14
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hour