10
cooking zones do not operate. The heat
setting display shows
To activate the function: touch
Touch
or
of the timer to set the time.
When the time comes to an end, the
sound operates and 00 flashes.
To stop the sound: touch
The function has no effect on
the operation of the cooking
zones.
STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the hob,
you also deactivate this
function.
Child Safety Device
This function prevents an accidental
operation of the hob.
.
.
.
.
.
.
.
To activate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
the hob with
.
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
the heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
OffSound Control (Deactivating
and activating the sounds)
Deactivate the hob. Touch
seconds. The display comes on and goes
out. Touch
for 3 seconds.
comes on. Touch
choose one of the following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
Power management
• All cooking zones are connected to one
phase. See the illustration.
• The phase has a maximum electricity
loading of 7400 W.
• The function divides the power
between cooking zones.
• The function activates when the total
electricity loading of the cooking zones
exceeds 7400 W.
comes on. Deactivate
comes on.
.
.
for 4 seconds. Set
for 3
or
of the timer to
you can