Symbol
Description
minimum gas supply
DAILY USE
WARNING! Refer to Safety
chapters.
Burner overview
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
Ignition of the burner
A
1. Push the control knob down and turn it
counterclockwise to the maximum gas
B
supply position (
2. Keep the control knob pushed for
equal or less than 10 seconds. This
C
lets the thermocouple warm up. If not,
D
the gas supply is interrupted.
3. Adjust the flame after it is regular.
A
B
C
D
Always light the burner before
you put on the cookware.
WARNING! Be very careful
when you use open fire in the
kitchen environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
).
If after some tries the burner
does not light, check if the
crown and its cap are in correct
positions.
WARNING! Do not keep the
control knob pushed for more
than 15 seconds. If the burner
does not light after 15 seconds,
release the control knob, turn it
into off position and try to light
the burner again after minimum
1 minute.
11