10
PRODUCT DESCRIPTION
Cooking surface layout
Control knob
Symbol
Description
no gas supply / off posi‐
tion
DAILY USE
WARNING! Refer to Safety
chapters.
Burner overview
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
Semi-rapid burner
1
1
Rapid burner
2
Auxiliary burner
3
Control knobs
4
2
3
4
Symbol
Ignition of the burner
A
1. Push the control knob down and turn it
counterclockwise to the maximum gas
B
supply position ( ).
2. Keep the control knob pushed for
equal or less than 10 seconds. This
C
lets the thermocouple warm up. If not,
D
the gas supply is interrupted.
3. Adjust the flame after it is regular.
Description
ignition position / maxi‐
mum gas supply
minimum gas supply
Always light the burner before
you put on the cookware.
WARNING! Be very careful
when you use open fire in the
kitchen environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
If after some tries the burner
does not light, check if the
crown and its cap are in correct
positions.