Automatic Heat Up; Powerboost - ARTHUR MARTIN AID745FK Notice D'utilisation

Bridge
The function operates when the
pot covers the centres of the
two zones.
This function connects two cooking zones
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the
left / right control sensors.
To deactivate the function: touch
. The cooking zones operate
independently.
When you use only one cooking zone of
the pair we recommend that you use the
rear cooking zone. Also when you use
large cookware we recommend that you
put it near to the rear cooking zone.

Automatic Heat Up

Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at
the desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch (
Immediately touch a desired heat setting.
After 5 seconds
To deactivate the function: change the
heat setting.

PowerBoost

This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
/ . To set or
comes on).
comes on.
Refer to "Technical information"
chapter.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
/
zone then set the function.
To activate the function or change the
time: touch
set the desired time (00 - 99 minutes). The
function starts automatically. After 3
seconds the heat setting of the cooking
zone comes on the display.
To see the remaining time: touch
the desire cooking zone. The display
shows the remaining time.
To deactivate the function: touch
then touch
back to 00.
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To activate the function: touch
comes on the display. Touch again
activate the function. When this function is
active, comes on. The display shows
how long the zone operates.
To deactivate the function: set the
cooking zone with
comes on the timer display and after 3
seconds the heat setting appears.The
symbol goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
. comes on.
and then touch
. The remaining time counts
and touch
9
or to
for
and
. 00
to
. 00