Troubleshooting - Saey CROSS Notice D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9
T
ROUBLESHOOTING
Storing
The fires burns really bad The wood is too wet
Window gets dirty really
quick
Signs of smoke at first use of
the stove
Moisture
Too much smoke
Chimney fire
Oorzaak
Wrong fuel
Chimney draught is too weak
(min 12 Pa)
Too little combustion air
The wood is too wet
Wrong fuel
Too many wood
Too little combustion air
The base paint is drying out
High temperature difference
Chimney draught is too weak
(min 12 Pa)
Fuel hasn't burnt completely
Wrong fuel
Too much fuel
Bad maintenance
Oplossing
Use dry wood : humidity max. 20%
• Only use suitable wood
• Respect the right quantity of wood
• Check the density of the exhaust pipe
• Clean the chimney
• Check the diameter of the smoke
outlet and air supply
• Check all ventilation in the house, if
necessary open window
Use dry wood : humidity max. 20%
• Logs aren't small enough
• Use only the right wood
Don't refill more than 2-3 pcs max.
• Check that there is a good passage in
the supply pipe
• Install an extra air supply conduct
• Shut down the ventilation system of
the house
Disappears after a while. Is harmless
Open the door of the stove a little
when starting to heat up and stay near
the stove
• Check the density of the exhaust pipe
• Clean the chimney
Only refill wood in the stove as long as
there are no more orange flames visible.
Shut down the air supply immediately
and call your local fire department
71

Publicité

Table des Matières
loading

Table des Matières