Saey CROSS Notice D'installation Et D'utilisation page 55

Connection of a combustion air duct
An airbox is available as an optional accessory.
A combustion air pipe from outside can be connected to the Ø 80 mm combustion air connection piece.
The Saey Cross draws all of its combustion air through this connection piece.
Assembly of the airbox
Remove the bottom plate -
2 hexagonal screws on the side,
M8, SW 13 mm with washers
Remove the back panel -
6 screws, M6 x 8 mm,
cross-head screws
Rear side Saey Cross,
combustion air connection at the bottom
55