Motorola Talkabout T6200 Manuel De L'utilisateur page 42

QuieT6000™ (continued)
If you have a T6200 radio with QuieT6000 on and want to talk to others in your
group who also have QuieT6000 on, you must first transmit a call tone before talking
to them. When the call tone is transmitted,
T6300 series radios with the same channel, interference eliminator code, and
QuieT6000 on, letting them know that you want to talk to them. Those radios can
then receive and transmit until 30 seconds of inactivity occurs, which resets the
QuieT6000 function. While QuieT6000 is on,
function is on. However, during the 30 seconds of inactivity,
Unique Situations
QuieT6000 can also keep your radio quiet when you are in a situation where noise
can be disruptive, such as when you are in a movie theater or out hunting. Set
QuieT6000 to either 1 or 2 and set your radio's alert to 1 (VibraCall only). Now
when you receive a call from another T6200 or T6300 series radio, your radio will
vibrate while the
you press any button. Only then can you receive and transmit to those radios until
30 seconds of inactivity occurs and the QuieT6000 function resets.
40
displays on the screen. The
^
will display on the other T6200 or
^
is displayed to indicate that the
F
F
will remain on the screen until
^
will flash.