Intended use
5
Intended use
The blind is suitable for:
• Installation in yachts and boats
• Installation in caravans and motor homes
• Installation in homes
The design and size of the blinds are custom-made. The fabric of the blinds is cut
to fit the customer's specifications.
The blinds are designed for interior use only and should not be installed in bath-
rooms, wet rooms or other locations with a high level of humidity.
This product is only suitable for the intended purpose and application in accor-
dance with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
6
Technical description
The blinds are available for a connection to 12 Vg or 24 Vg.
The motor can be controlled using:
• Switches
• Radio remote controls
• Central control systems
Available blind types are (see dimension drawings
page 15):
• D2: Double-ended with two fabrics, full travel
• S1: Single ended with one fabric, full travel
• SO: Single-ended, frame open at one end with one fabric, full travel
20
Skysol Powered Roofblind
fig. k
to fig. m
, page 13
,
EN