Electrolux EN6086JOX Notice D'utilisation page 14

14 www.electrolux.com
Temperature alarm
This is an important feature that alerts
users of potential damage to stored food.
If a power failure occurs, for example a
blackout in your area of residence while
you are away, the temperature alarm will
memorize the temperature of the freezer
when power was restored to the unit; this
is likely to be the maximum temperature
reached by frozen items.
A temperature alarm condition will be
indicated by Alarm light and buzzer when
the temperature reading is warmer than
-9ºC, then
a- The Alarm icon lights up;
7. USING YOUR APPLIANCE
7.1 Cold water dispenser
The cold water dispenser, located in the
left refrigerator door, is used for storing
drinking water. This feature provides
chilled water easily without opening the
door.
• Cleaning
Please clean the water dispenser
before using it for the first time.
step 1: pull out the water dispenser
step 2: wash with clear water
step 3: dry it
• Assembling
Please refer to the following instruction
to reassemble the dispenser.
1. Hold tightly both sides of the water
container then lift it up and put it
out from the door.
2. Unscrew the head in counterclock-
wise direction.
3. Insert them back on the door and
push the container until you hear a
click sound.
All manuals and user guides at all-guides.com
b- The freezer temperature indicator
displays "H";
c- The buzzer beeping 10 times when the
alarm is triggered and stop automatically.
Child Lock
Press and hold the "Alarm"
button for 3 seconds to
activate the child lock.
This will disable the display to
prevent accidental changes
to settings. Meanwhile, the "Child Lock"
icon will be illuminated.
• To turn the child lock off, press and
hold the "Alarm" button for 3 seconds.
The "Child Lock" icon will be turned off.
Small lid
WARNING!
When inserting the water contain-
er, ensure the head sits correctly
into the hole first.
Filling water
Before you fill the drinking water
into the water container, ensure
that the water container is steady
and placed into a correct position.
To prevent water from overflowing
and spilling, fill the water container
below the maximum level mark
which is approximately about 4.0L.
There are two ways to fill the water
container:
1. By removing the small lid and
fill water from the inlet of the
large lid.
2. By removing the large lid of the
tank, and then fill water directly.
Head
Large lid