Cabinet Requirements - Haier DW-7777-01 Installation

English

CabInET REQUIREMEnTS

Do not run water drain lines or electrical wiring where they can interfere with or
contact dishwasher motor or legs.
The location where the dishwasher will be installed must provide clearance
between motor and flooring.
Do not install dishwasher over carpeted flooring.
Protect dishwasher and water lines leading to dishwasher against freezing.
Damage from freezing is not covered by the warranty.
chEck locATIoN WhERE DIshWAshER WIll bE INsTAllED.
ThE locATIoN musT pRovIDE
• Easy access to water, electricity and drain.
• Convenient loading.
• Corner locations require a 2" (5.1cm)minimum clearance between the side of
the dishwasher door and wall or cabinet.
• Square opening for proper operation and appearance.
• Cabinet front perpendicular to floor.
• Level floor. If floor at front of opening is not level with floor at rear of opening,
shims may be needed to level dishwasher.
Note: Shims must be securely attached
to floor to prevent their movement when
dishwasher is being operated. If dishwasher
will be left unused for a period of time or
in a location where it may be subject to
freezing , have it winterized by authorized
service personnel. Make sure pipes, wires
and drain hose are within the shaded
area shown in diagram. See page 10 for
dimensions.
If the floor at the cabinet opening is uneven (example:tile flooring only
part way into cabinet) you will need to take special care in measuring
7
hElPfUl TIP:
dimensions and in leveling dishwasher.