Safety Requirements; Electrical Requirements; Grounding Instructions - Haier HDC1804TW Mode D'emploi

SAFETY REqUIREMENTS

Electrical Requirements

Grounding Instructions

This appliance must be plugged into at least a 15 AMP 120 Volt 60 Hz
Grounded Outlet. This appliance must be grounded. It is equipped with a 3-Wire
cord having a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded.
Warning! Improper use of the grounded wire can result in the risk of electric
shock. Consult a qualified electrician if necessary. Do not attempt to
defeat this safety feature by modifying the plug.
Avoid the use of an extension cord because it may overheat and cause a risk of
fire. However, if it is necessary to use an extension cord:
A. Use only 3-wire extension cord with 3-blade grounding plug.
B. The marked rating of the extension cord must be equal to or greater than the
rating of this appliance.
C. It should be positioned such that it does not drape over the counter or table-
top where it can be pulled by children or tripped over.
Attempting any maintenance or cleaning:
To minimize the possibility of electric shock, unplug this appliance from the
power supply or disconnect at the household electrical panel by removing the
fuse or switching off the circuit breaker before attempting any maintenance or
cleaning.
Pressing the Power ON/OFF button to an off position does NOT discon-
Note:
nect the appliance from the power supply.
Avoid fire hazard or
electric shock. Do not use an extension
cord or an adapter plug. Do not remove
any prong from the power cord.
Grounding type
wall receptacle
Do not, under any
circumstances,
cut, remove,
or bypass the
grounding prong.
Power supply
cord with 3-prong
grounding plug
English
3