Prepare Dishwasher - Haier DW-7777-01 Installation

English

pREpARE DIshWAshER

Do not use dishwasher until completely installed.
Do not push down on open door. Doing so can
EXCESSIvE WEIGhT hazaRD
Use two people to move and install dishwasher. failure to
1. Grasp sides of dishwasher door and
place dishwasher on its back.
2. Remove two screws "a" attaching
access panel "b" and lower panel
"C" to dish- washer using a 1/4"
hex socket, nut driver or Philip's
screwdriver. Remove panels and
set panels aside in a safe place.
Make sure that grounding clip "D" is
attached to the lower panel.
3. apply pipe joint compound "E" to
90∞elbow fitting "f" and connect
fitting to water inlet valve "G".
Tighten elbow until snug, making sure
that it faces to the rear.
15
WARNING
Tip over hazard
result in serious injury.
WARNING
do so can result in back or other injury.
A
B
C
A
D
E
F
G
F