Before Using Your Dishwasher; Electrical Requirements - Haier HDBC100AFS Guide De L'utilisateur

Before you throw away your old appliance, remove the door or lid so
that children cannot hide or get trapped inside your old appliance.
Failure to follow these instructions can result in death or brain damage.

BEFORE USING YOUR DISHWASHER

•
Install where dishwasher is protected from the elements. Protect against
freezing to avoid possible rupture of fill valve. Such ruptures are not covered by
the warranty. See "Storing" in the "Dishwasher Care" section for winter storage
information.
•
Install and level dishwasher on a floor that will hold the weight and in an area
suitable for its size and use.
•
Remove all shipping plugs from hoses and connectors (such as the cap on
the drain outlet) before installing. See Installation Instructions for complete
information.

ELECTRICAL REQUIREMENTS

Electrically ground dishwasher.
Connect ground wire to green ground connector in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death, re, or
electrical shock.
This dishwasher is designed for operation on an adequately wired individual 120V,
60Hz. Use required 15 amp fused electrical supply with copper wire only. Time-delay
fuse or circuit breaker recommended, and provide a separate circuit serving only
this appliance. Outlet should be placed in adjacent cabinet.
WARNING
Suffocation Hazard
WARNING
Electrical Shock Hazard
5