Festo CP FB6-E Notice Simplifiee page 11

CP FB6-E
1
User information
The CP fieldbus node 6 is designed exclusively for use as a
slave on the INTERBUS-S. The limit values of the technical
specifications must be observed.
Please refer to the manual P.BE CP-FB6-E... for detailed infor-
mation.
WARNUNG:
• Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
• Connect a protective earth conductor with sufficient
cross section to the connection marked with
if the node is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a node which is completely fitted and electri-
cally wired.
9709 NH
,
11