Publicité
Les langues disponibles
Les langues disponibles
General view
1. Cover handle, pressure system - Provides
convenient opening and closing of the ap-
pliance and the correct pressure to weld the
EN
tray. The applied system does not require the
use strength more than it is necessary.
2. Cover – Protect heating plate.
3. Heating plate.
4. Roll with foil – Foil is not included with ap-
pliance.
5. Foil cutter knife - Ensures that the foil is
safely cut after the cover is completely closed.
6. Foil holder -Ensures holding the edge of the
foil after cutting.
7. Cutter - Ensures that the foil is held and safe-
ly cut after the cover is completely closed.
User manual
Preliminaries
The spacing of the bush (red marking) should be
adjusted to the width of the roll with foil, ensur-
ing the correct position of the foil in relation to the
container.
6
8. Silicone gasket of container - Presses the
edge of the container to the foil at the point
of sealing.
9. Container's matrix - Ensures product tray
support (The top view of the matrix is adapted
to the shape of the container).
10. Power switch (Button) - Allows you to switch
the appliance on / off by pressing the button
(the switch-on status is indicated by the back-
light of the button).
11. Temperature controller - Allows you to ad-
just the temperature according to the type of
foil and containers. Maintains the tempera-
ture of the heating plate constant as set.
12. Fuse.
Publicité
