Sirius SLTC 111 Instructions D'utilisation Et Avis De Montage page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Chimney Installation
Lift up the internal stainless steel chimney up to
wished installation height. Trace with a pencil the
end of the internal chimney on the both sides (fig.
11) , lower the whole chimney and position the
fixing bracket in correspondence with marking
made (fig. 12); fix the bracket using the screws
supplied(fig. 13) . Lift up the internal chimney until
it covers the bracket and block it by fixing screws
positioned on both sides(fig. 14).
Filtering version
Install the air outlet grill above the hood in the
relative seat (see fig. 15). The chimneys are not
necessary.
SL111
The charcoal filter is installed as shown in fig. 16,
by fitting it into its seat that is found just behind
the metal grease filter.
Charcoal filters should be replaced according to
the effective use of the hood, and however at le-
ast once every 6 months.
OPERATION
Mod. SLTC111 - Glass (dis. 17)
A: Light switch ON/OFF
B: Reduce speed / OFF motor
C: Speed Indicators
D: ON motor / increase
E: 10 - minute timer
At the top of the product there is a switch to turn off
the hood (fig. 19).
ATT: This switch does not disconnect the pro-
duct from the mains.
The touch control key allows to set the desidered
function by touching the relative key.
If the electrical power supply to the product SLTC
is cut, 15 seconds are needed for selfdiagnostics
after the functions are restored.
In the meanwhile, its operation may be incorrect.
Mod. SL116 (Fig. 22)
A: Light switch on/off
B: Motor switch on speed 1/off
C: Motor switch on speed 2
D: Motor switch on speed 3
E: Motor switch on speed 4
F: 10-minutes timer)
DIMMABLE LIGHTS FUNCTION
THIS FUNCTION PROVIDES FOR LIGHTS DIM-
MABILITY, RANGING FROM 20% TO 100% , BY
CONTINUOUSLY PRESSING THE LIGHT KEY
ON THE REMOTE CONTROL.
FUNCTIONS ARE THE FOLLOWING:
- HOOD LIGHT OFF - SHORTLY PRESS THE
KEY - LIGHT ON AT 100%.
- LIGHT ON AT 100% - SHORTLY PRESS THE
KEY - LIGHT OFF.
- LIGHT ON AT 100% - CONTINOUSLY PRESS
THE KEY - BRIGHTNESS REDUCTION.
- RELEASING THE KEY DURING REDUCTION
OR INCREASE - LIGHT KEEPS THE LUMI-
NOUS INTENSITY REACHED.
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sl 116

Table des Matières