Maintenance And Care - afx light Zoom Led Moving Head LEDWASH-1912Z Manuel D'utilisation

If the lens is damaged, it needs to be replaced immediately.

Do not let a layman operate the unit.

Keep the original packaging if you have to transport the unit.

Do not attempt to repair the unit yourself. All repairs must be carried out by a qualified

technician.
INSTALLATION
When choosing the installation location, make sure that there are no inflammable materials within
0.5 meters around the unit.
WARNING: Make sure that the installation place is stable and can support ten times the weight of
the unit. The installation location should not show any signs of distortion after 1 hour.

MAINTENANCE AND CARE

Keep the unit clean which means dust, dirt or draft of tobacco tar should not remain on or inside
the case, otherwise it will strongly reduce the light output of the LED moving head. Regular cleaning
increases not only the light output but also the lifetime of the unit. Clean the unit with a soft cloth
with premium glass detergent. Don't use alcohol or solvent!
Danger: Switch off the power supply before doing any maintenance.
The front glass is easily stained by the draft of tobacco tar, which will decrease the light output, so it
should be cleaned once a week. Clean the cooling fan once a month.
The unit doesn't contain any user serviceable parts except for the fuse.
Only a qualified technician is entitled to open the unit.
Replacement of the Fuse
If the fuse needs to be changed, replace it only by a fuse having the same specifications as the
original one.
Unplug the unit from the mains prior to changing the fuse.
SPECIFICATIONS
Power supply .................................................................................................. 110-240Vac 50/60Hz
Consumption ..........................................................................................................................300W
Light source ................................................................................................. 19 LED 4-en-1 de 12W
Pan/Tilt ..................................................................................... 540° / 270° (electronic correction)
Beam angle ........................................................................................................................... 10-60°
Strobe ............................................................................................................ 1-12 flashes/second
Channels .......................................................................................................... Full or circle control
Weight .................................................................................................................................... 7.4kg
Dimensions ....................................................................................................... 300 x 200 x 170mm
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your
local authorities or your dealer about the way to proceed.
7