Samsung BD-HDD Combo Manuel D'utilisation page 41

Definition for
Any
Blu-ray Disc
* If the Source Stream is 2ch, "Re-encoded Dolby D" Setting are not applied. Output will be PCM 2ch.
** If HE-AAC Source Stream is 2ch or 1ch, Output shall be 2ch PCM.
For Dolby Digital Plus stream on Internet Content, PCM Output via HDMI supported up to 5.1ch.
*** If the Audio Description is set to On and the Number of Audio Channel is more than 2, audio output
will be changed Dolby Digital even if the original broadcast stream is Dolby Digital Plus.
But, if the Number of Audio Channel is 2 (stereo) or 1 and Audio Description is set to On, Output
format will be PCM.
PCM Downsampling
Lets you set 48kHz and 96kHz PCM down-
sampling on or off.
Off : Select when the AV receiver connected to
•
the product is 96kHz compatible.
On : Select when the AV receiver connected
•
to the product is not 96kHz compatible. 96kHz
signals will be down converted to 48kHz.
NOTE
✎
Even when PCM Downsampling is set to Off, some
▪
discs will only output downsampled audio through
the optical digital outputs.
HDMI
• If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed
audio even though you set the digital output as
Bitstream (unprocessed/Re-encoded DTS/Re-
encoded Dolby D) on your setup menu.
• If your TV is not compatible with PCM sampling
rates over 48kHz, the product may output
48kHz downsampled PCM audio even though
you set PCM Downsampling to Off.
Decodes the main feature feature audio stream so that
audio and BONUSVIEW your AV receiver can decode
audio stream together
into PCM audio and adds
Navigation Sound Effects.
Navigation Sound Effects.
Decodes the main
feature audio and
Outputs only the main
BONUSVIEW audio
stream together
into PCM audio and
the audio bitstream.
adds Navigation
You will not hear
Sound Effects, then
BONUSVIEW audio or
re-encodes the
PCM audio into DTS
Dynamic Range Control
You can listen at low volumes, but still hear dialog
clearly.
This is only active if your product detects a Dolby
Digital, Dolby Digital Plus or Dolby TrueHD signal.
Auto : The Dynamic Range Control will be set
•
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
Off : You can enjoy the movie with the standard
•
Dynamic Range.
On : When Movie soundtracks are played at low
•
volume or through smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
Downmixing Mode
Lets you select how the product will downmix
multi-channel audio into fewer channels.
Normal Stereo : Downmixes the multi-channel
•
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
Surround Compatible : Downmixes multi-
•
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
bitstream. into Dolby digital
bitstream.
1
English