Troubleshooting - Microlife WatchBP Ofice AFIB Mode D'emploi

Troubleshooting

Problem
No power(No LCD display) Power supply is not
Cuff does not inlate
properly
No result displayed
between measurements
Possible cause
properly plugged in
Battery is fully discharged Recharge the rechargeable battery by plugging in
Loose connection of the
tube
Leakage of the tube or
bladder
The Hide function is
activated
How to make correction
Plug power supply into wall socket.
the power supply.
Make sure the tube of the cuff is securely
connected to the device.
Check for cracks on the tube or the bladder. Please
contact Microlife customer service for this issue.
Disable "hide" function, or use «ROUTINE» mode to
measure the blood pressure.
35 EN