Unpacking The Unit - American Standard 3052OD.0 Serie Instructions D'installation Et Manuel Du Propriétaire

1. FIRST, inspect the carton for damage: CAREFULLY DOCUMENT AND PHOTOGRAGH ALL PERCEIVED
DAMAGE. Report all damage claims to customer service at 1-866-423-0800.
2. DO NOT LIFT THE TUB BY THE PLUMBING. Doing so can result in leaks, for which the installer is
responsible. All Walk-In Tubs are water tested before they leave our factory and the bathtub you have
purchased has passed inspection.
3. Immediately inspect the unit for damage even if there is no carton damage. All product damage must be
reported within 72 hours of receipt from American Standard
be assumed to be installation-related if not reported prior to installation. Installers are also responsible
for damage that occurs once the unit is placed in its niche.
NOTE: Remove all packaging material except for the protective plastic. This has been placed on the tub at
the factory to eliminate abrasions from handling. Thisshould only be removed at final clean up.
4. Inspect the plumbing for any fittings that may have loosened in transit.
5. Read the following instructions completely before installing this product. If the home-owner or installer has any
questions, please call us at 1-866-423-0800.
6. You must follow all the instructions in this manual.
FAILURE TO READ AND COMPLY WITH ALL INSTRUCTIONS CAN RESULT IN PRODUCT DAMAGE
OR INJURY TO BOTH INSTALLER AND HOMEOWNER. IT WILL ALSO RESULT IN
LIABILITY BY SAID INSTALLER.
754818-100 Rev. A

UNPACKING THE UNIT

4
. Once the unit is installed, surface damages will
®
OWNER'S MANUAL
ASSUMPTION OF ALL