Publicité
Les langues disponibles
Les langues disponibles
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before you start
construction, referring to the Parts List, as we cannot exchange components which you have already modified. If you find any
part is not acceptable for any reason, we will readily correct or exchange it once we have examined the faulty component. Just
send the offending part to our Model Department. Please be sure to include the purchase receipt and the enclosed complaint
form, duly completed.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the term. Building
and operating them safely requires a certain level of technical competence and manual skill, together with discipline and a
responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in serious
personal injury and damage to property. Since we, as manufacturers, have no control over the construction, maintenance
and operation of our products, we are obliged to take this opportunity to point out these hazards and to emphasise your
personal responsibility.
Additional items required for the "Blizzard":
MULTIPLEX receiving system components for the Blizzard
RX-7-Synth IPD receiver
or
RX-7-Synth IPD receiver
alternatively:
Nano-Karbonite servo
Nano-S servo
Optional separation filter lead, 200 mm UNI (for speed controller)
4 x 200 mm UNI servo lead (2 x central connector, 2 x elevator servos)
1 x High-current plug (green)
1 x High-current socket (green)
Battery charger:
MULTIcharger LN-3008 EQU
for LiPo, LiIo and LiFe batteries (2S / 3S) and NiMH
and NiCd batteries (four to eight cells)
Blizzard power set:
Contents:
Himax 3510-1100 motor, BL-37 II speed controller, 9 x 7" folding
propeller, taper collet, driver and 39 mm Ø spinner
Blizzard TUNING power set:
Contents:
Himax 3516-1350 motor, BL-54 speed controller, 9 x 6" folding
propeller, taper collet, driver and 39 mm Ø spinner
Flight battery:
Li-Batt BX 3/1-2100
or
Li-Batt BX 3/1-2500
Receiver battery for glider version
Tools:
Scissors, balsa knife, combination pliers, screwdriver.
Note: please remove the illustration pages from the centre of the instructions.
Specification:
Wingspan:
Overall length:
All-up weight, glider:
All-up weight, electric:
Total surface area:
Wing loading min.:
RC functions:
GB
35 MHz A-band
35 MHz B-band
40 / 41 MHz band
2 x required (ailerons)
1 - 2 required (elevator (rudder))
4/2100-AA-W
1380 mm
910 mm
approx. 735 g
approx. 820 / 925 g / Standard / Tuning
19.4 dm²
38 g/dm² glider, 42 g/dm² electric, 47 g/dm² electric (Tuning)
Aileron, elevator, (rudder), motor
# 21 4233
Order No. 5 5880
Order No. 5 5881
Order No. 5 5882
Order No. 6 5118
Order No. 6 5120
Order No. 8 5133
Order No. 8 5213
Order No. 8 5214
Order No. 9 2540
Order No. 33 2639
Order No. 33 2643
Order No. 15 7131
Order No. 15 7191
Order No. 15 6052
15
Publicité
