Alpine PKG-RSE1 Mode D'emploi page 77

Custom Setup
Custom Setup Operation
The following steps (1 through 5) are common to each of the
mode settings. Once the mode is selected under the CUSTOM
SETUP menu, refer to the section for that mode for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
2
Press or to select "CUSTOM SETUP," then
▲ ▼
press ENT.
3
Press or to select your desired setting item,
▲ ▼
then press ENT.
CUSTOM SETUP items:
CD PLAY MODE / VCD PLAY MODE / PAUSE MODE /
DOWNMIX MODE
4
Press or to change the setting item, then
▲ ▼
press ENT.
DVE-5207.indb 19
5
Press SETUP.
The settings are stored and the setup mode is deactivated.
• Press RETURN to return to the previous display.
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle's
battery is disconnected, the settings will be cleared and will return
SETUP
to the factory settings.
▲
Setting the CD Play Mode
ENT.
The unit can be set to play only the audio data or only the MP3 files
on discs containing both types of music data.
▼
Setting item: CD PLAY MODE
Setting contents: CD-DA / COMPRESSED AUDIO
CD-DA:
RETURN
COMPRESSED AUDIO: Only MP3 data can be played back.
• If a disc has already been inserted, perform the setting after you
remove the disc.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON / PBC OFF
PBC ON:
PBC OFF: The PBC menu is not displayed.
Setting the Pause Mode
In pause mode, screen blurring may occur. To overcome this, set
AUTO/FIELD/FRAME accordingly.
Setting item: PAUSE MODE
Setting contents: AUTO / FIELD / FRAME
If you experience blurring during pause mode, set to FIELD or
FRAME.
The initial setting at the factory is AUTO.
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO / SURROUND ENCODED
STEREO:
SURROUND ENCODED: Surround compatible Downmix
Only CD data can be played back.
The initial setting at the factory is
CD DA.
The PBC menu is displayed.
The initial setting at the factory is PBC ON.
Stereo Downmix
The initial setting at the factory is
SURROUND ENCODED.
19
-EN
4/14/05 5:34:08 PM