Alpine PKG-RSE1 Mode D'emploi page 67

Initial System Start-Up
Be sure to press the RESET button when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET with a ball-point pen or similar
pointed object.
Loading and Unloading Discs
Turn on the power before loading and unloading discs. (Refer to
"Turning the power on and off " on page 8.)
Loading discs
Insert the disc with the label side facing upwards.
Once the disc is partially inserted, it is drawn in automatically.
Playback starts.
• If the ignition key is on ACC or ON, a disc can be inserted even
when the power is OFF.
• For two-sided DVDs, play one side of the disc to the end, then
unload the disc, turn it over and reload it to play the other side.
• Never insert map discs for navigation purposes as they could
damage the equipment.
• If wrong disc, upside-down discs or dirty discs have been inserted,
"DISC ERROR" is displayed. Press
Unloading discs
Press .
Be sure to remove the disc.
• If the disc is not removed within a few moments, it will be reloaded
automatically.
• If the ignition key is set to ACC or ON, a disc can be removed even
when the power is OFF. After removing the disc, the power turns
OFF again automatically.
• During ACC OFF or while the disc is being loaded ("LOADING"
is displayed), the disc will not be ejected even if you press
DVE-5207.indb 9
Setting the Wallpaper
A data file downloaded from the ALPINE Owner's website is written
to a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVE-5207.
The wallpaper file can be saved and displayed only if the current disc
is not playing back pictures or CD/MP3 audio.
• If several files are stored in a disc, only the first file will be stored
1
2
RESET
• Up to 2 files can be stored on this unit. If a third file is downloaded,
• To change the wallpaper, press and hold ENT. for at least 2
• Even if the battery power cable is removed, the downloaded data is
and eject the disc.
.
on the unit.
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the DATA DOWNLOAD screen is
displayed.
Press and hold ENT. for at least 2 seconds to
change the wallpaper.
the first file is overwritten and new one memorized.
seconds while displaying it.
not cleared.
9
-EN
4/14/05 5:33:50 PM