Publicité
Les langues disponibles
Les langues disponibles
GB
1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (23) with the
4-digit PIN.
The charge status is now shown by
the battery symbol in the bottom right
corner.
3. Close the cover on the LCD display
(2). The automatic lawn mower re-
sumes its previous activity without
interruption.
Once the charging procedure is
complete, the battery symbol may
lack a graduation mark on the LCD
display (2). The automatic lawn
mower is fully charged neverthe-
less.
Practical tips
Regular mowing stimulates the grass to
an increased leaf formation, while at the
same time killing weeds. Therefore, the
lawn becomes denser after each mowing
process, resulting in an evenly loadable
lawn.
The first cut takes place roughly in April
when the grass is about 7 - 8 cm high.
During the main growing season, the lawn
is mowed at least once a week.
Setting the cutting height
Switch off the device and wait for
the blade to come to a stop. There
is a risk of personal injury.
1. Open the cover on the cutting height
adjustment (3)
2. Set the cutting height adjustment
wheel (14) to the desired cutting
height.
108
3. Close the cover on the cutting height
adjustment (3).
The device can be infinitely adjusted to a
cutting height between 20 and 60 mm.
The correct cutting height is between 30
and 45 mm for an ornamental lawn and
about 30 to 65 mm for a utility lawn.
A high cutting height should be
selected for the first cuts in the
season.
Manually interrupting/
starting the operating
cycle
Interrupting the operation
Press the stop button (1) to stop the mow-
er during operation.
Starting/resuming operation
1. Open the cover on the LCD display
(2).
2. Press the start key (18).
3. Close the cover on the LCD display
(2).
The automatic lawn mower starts the
set operating cycle or resumes its pre-
vious activity without interruption.
Cleaning/maintenance/
storage
Have any work that is not de-
scribed in these instructions
performed by an authorised cus-
tomer service centre. Only use
original parts.
Publicité
