Publicité
Les langues disponibles
Les langues disponibles
Cleaning and user mainte-
nance shall not be made by
children without supervision.
• To charge the battery, use only
the charger supplied. Risk of
fire and explosion. This en-
sures that the safety of the de-
vice is maintained.
• Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a de-
fective charger and do not open
it up yourself. This ensures
that the safety of the device is
maintained.
• Connect the charger only to a
socket with an earth. Ensure
that the mains voltage matches
the specifications on the charg-
er rating plate. Risk of electric
shock.
• Disconnect the charger from
the mains before closing or
opening connection to the bat-
tery / power tool / device. This
ensures that the battery and
charger are not damaged.
• Keep the charger clean and
away from wet and rain. Do not
use the charger outdoors. Dirt
and the entry of water increase
the risk of electric shock.
• Operate the charger only with
the appropriate original batter-
ies. Charging other batteries
may result in injuries and risk of
fire.
• Avoid mechanical damage to
the charger. This can result in
internal short circuits.
• The charger must not be operat-
ed on or in the immediate vicin-
ity of flammable surfaces (e.g.
paper, textiles). Risk of fire due
to heating caused by charging.
• If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.
• Do not attempt to charge non-
rechargeable batteries in the
charger. The device could get
damaged.
Initial start-up
Regularly check the lawn area for
rocks, branches, wires and other
objects that may damage the de-
vice and the blades.
Make sure that the mowing zones
for two or more automatic lawn
mowers are placed at a sufficient
distance (at least 2.5 - 3 m) from
each other.
If mowing zones are too close to
each other, this can cause the de-
vices to malfunction.
Positioning the charging
station
1. Select a flat position near a socket for
the charging station (12) with at least
2 m of space in front and 1 m behind.
2. Secure the charging station and the
charging station bumper (12b) with the
fixing nails (8).
The charging station bumper (12b)
is fastened to the side of the charg-
ing station outside the restricted lawn
area.
GB
101
Publicité
