Grizzly Tools MR 1000 Traduction De La Notice D'utilisation Originale page 106

GB
The reference point for the
route measurement on the
boundary wire is the rear of
the charging station (12).
Make sure that you are generous
when selecting the route that the
automatic lawn mower needs to
cover on the boundary wire (6).
This ensures that the automatic
lawn mower actually reaches the
secondary and tertiary lawn areas
before it starts mowing.
Setting the rain sensor
Never operate the automatic
lawn mower during storms and
make sure to disconnect the
charging station from the mains.
If the rain sensor is switched on ("Mowing
during rain" option set to "No"), the auto-
matic lawn mower returns to the charging
station during periods of rain and fully
recharges the battery. The automatic lawn
mower resumes its work after 2 hours.
1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (15) with the
4-digit PIN.
3. Use the arrow keys (20) to select the
"General settings" symbol.
4. Confirm the selection with the
OK key (22).
Use the arrow keys (20) to navigate to
"Mowing during rain".
6. Confirm the selection with the OK key
(22).
7. Activate the rain sensor by selecting
"No" or deactivate the rain sensor by
selecting "Yes".
106
8. confirm the selection with the OK key
(22).
9. Return to the main menu with the back
key (21).
10. Confirm the selection with the OK key
(22).
We recommend not operating the
automatic lawn mower in the rain.
Setting the edge trim function
If the edge trim function is activated,
the device mows during its return to the
charging station
1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (23) with the
4-digit PIN.
3. Use the arrow keys (20) to select the
"Operating time settings" symbol.
4. Confirm the selection with the
OK key (22).
5. Use the arrow keys (20) to navigate to
"Edge trim".
6. Confirm the selection with the OK key
(22).
7. Activate the edge trim function by
selecting "Yes" or deactivate the edge
trim function by selecting "No".
8. confirm the selection with the OK key
(22).
9. Return to the main menu with the back
key (21).
10. Confirm the selection with the OK key
(22).
Reading error memory
1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (23) with the
4-digit PIN.