Télécharger Imprimer la page

Grizzly Tools MR 1000 Traduction De La Notice D'utilisation Originale page 107

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
3. Use the arrow keys (20) to select the
"Operating time settings" symbol.
4. Confirm the selection with the
OK key (22).
5. Select the "Warning" option.
6. You can now read the error data of the
automatic lawn mower in the following
menu.
Reading runtime
1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (23) with the
4-digit PIN.
3. Use the arrow keys (20) to select the
"Operating time settings" symbol.
5. Select the "Machine time" option.
6. The following menu will now display
the runtime of the motors and the
entire operating time of the automatic
lawn mower (since the last firmware
update).
Charging
Do not expose the battery to
extreme conditions such as
heat and shocks. There is a risk
of injury from leaking battery
fluid! In case of contact with
eyes or skin, rinse the affected
sites with water or a neutralising
agent and seek medical atten-
tion.
Only charge the battery with the
enclosed charger.
Charge the battery before using it for
the first time.
If the operating time is considerably
shortened despite charging, this
shows that the rechargeable battery is
depleted and must be replaced. Only
use an original battery purchased from
customer service.
Always comply with the latest safety
instructions, as well as the regulations
and information relating to environ-
mental protection.
Defects resulting from improper han-
dling are not covered by the guaran-
tee.
Charging the battery
The automatic lawn mower automatically
returns to the charging station when it has
a low charge status.
To do so, the automatic lawn mower lo-
cates the nearest boundary wire and fol-
lows this in a clockwise direction.
LED on the charging station
No display: Charging station is not con-
nected to the mains.
Illuminated red: Battery
charging.
Illuminated green: Battery
fully charged.
Checking the charge status of
the battery
You can check the charge status of the
automatic lawn mower on the LCD display
at any time.
GB
Flashing green:
Boundary wire dam-
aged or incorrectly
connected.
107

Publicité

loading