Snom 870 Guide Rapide page 15

Accepting calls
 With the handset: Pick up the handset
 With a headset: Press
 With the speakerphone: Press
Putting calls on hold
Press . The call LED starts to blink slowly, and
the held call is shown as a yellow button. Tap the
button to resume the call.
Conference
• Initiating:
1. Call all intended participants and put them on hold.
2. Tap
3. Drag-and-drop participants into the conference area (see "Using the touch
screen" on page 15, Fig. 8).
4. Tap
 Dropping one participant from conference: Drag-and-drop onto button on right side
of display (Fig. 9 + 9a).
 Stopping the conference and putting all participants on hold: Press
 Talking to one of the participants alone: Put all participants on hold and tap on
participant's yellow button.
 Resuming the conference: Drag and drop participants into conference area and tap
.
Call transfer
Attended transfer
Put the call on hold
announce the call. If that party wishes to accept the call, tap
the yellow button into the text fi eld > To transfer the call, tap the blue context area or
press .
Blind transfer
With call ringing or on the line: Tap
transferred to > Tap the text fi eld or press
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
or tap context area with ringing phone symbol
(up to 5 participants, including you)
to show "Set up conference" screen.
to start the conference (Fig. 7). Conference in progress: Fig. 9 + 9a.
> Call the third party you wish to transfer the call to and
snom 870 Quick Start Guide
> Dial the phone number the call is to be
to transfer.
or .
> Drag-and drop
15
E
N
G
L
I
S
H