Publicité
Les langues disponibles
Les langues disponibles
8904807
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1.
Disconnect the tool from the power supply before making any
adjustments, changing accessories, cleaning, servicing or when
storing. Such preventive safety measures reduce the risk of starting the
tool accidentally.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the tool to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
4.
Do not disconnect the power cord in place of using the power switch.
This will prevent an accidental start-up when the power cord is plugged
into the power supply.
a.
In the event of a power failure, turn off the machine as soon as the
power is interrupted. The possibility of accidental injury could
occur if the power returns and the unit is not switched off.
5.
Do not alter any parts of the tool or accessories. All parts and
accessories are designed with built-in safety features that may be
compromised if altered.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven tool, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
8.
This tool is only for use on 120 V (single phase) and is equipped with a
three-prong grounded power supply cord and plug. Check with a
qualified electrician if you are in doubt as to whether the outlet is
properly grounded. If the tool should electronically malfunction or
6
22 Ton Electric Kinetic Log Splitter
For technical questions call 1-800-665-8685
V4.0
Publicité
