Beurer BM 81 easyLock Mode D'emploi page 32

Measurement inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operating conditions
Permissible storage and transport
conditions
Power supply
Battery life
Expected service life
Classification
Data transfer via Bluetooth
technology
The serial number is located on the device or in the battery compartment.
Technical information is subject to change without notification to allow for updates.
• This unit is in line with European Standard EN 60601-1-2 (in accordance with CISPR 11, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-8) and is subject to particular precautions with regard to electromagnetic
compatibility (EEC). Please note that portable and mobile HF communication systems may interfere with
this unit.
• This device is in line with the EU Medical Devices Directive 93/42/EEC, the "Medizinproduktegesetz" (Ger-
man Medical Devices Act) and the standards EN 1060-3 (non-invasive sphygmomanometers, Part 3: Sup-
plementary requirements for electro-mechanical blood pressure measuring systems) and IEC 80601-2-30
(Medical electrical equipment – Part 2 – 30: Particular requirements for the safety and essential performance
of automated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been carefully checked and developed with regard to
a long useful life. If using the device for commercial medical purposes, it must be regularly tested for
accuracy by appropriate means. Precise instructions for checking accuracy may be requested from the
service address.
• We hereby confirm that this product complies with the European RED Directive 2014/53/EU.
The CE Declaration of Conformity for this product can be found under:
www.beurer.com/web/we-landingpages/de/cedeclarationofconformity.php
12. Warranty / service
Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet
supplied.
Max. permissible standard deviation according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
2 x 120 memory spaces
L 143 mm x W 91 mm x H 22 mm
Approx. 280 g (without batteries, with cuff)
24 to 40 cm
+5 °C to + 40 °C, 15 % – 90 % relative air humidity (non-condensing),
700 –1060 hPa ambient pressure
- 25 °C to + 70 °C, ≤ 90 % relative air humidity,
700 –1060 hPa ambient pressure
4 x 1,5 V
For approx. 300 measurements, depending on the blood pressure
level and/or pump pressure
at least 10.000 measurements
Internal supply, IP22, no AP or APG, continuous operation, applica-
tion part type BF
wireless The blood pressure monitor uses Bluetooth
®
2402MHz – 2480MHz frequency band,
Transmission power max. 4 dBm,
Compatible with Bluetooth
AAA batteries
4.0 smartphones/tablets
®
32
low energy technology,
®