Télécharger Imprimer la page

Beurer BM 81 easyLock Mode D'emploi page 31

Tensiomètre au bras

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
Error
Possible cause
message
The inflation pressure is higher
Er5
than 300 mmHg.
The batteries are almost empty.
Er6
Unable to transfer the data via
ER7
Bluetooth
10. Disposal
Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper operation can no longer be guaranteed in this case.
• Do not open the device. Failure to comply will invalidate the warranty.
• Repairs must only be carried out by Customer Services or authorised retailers. Before making a claim,
please check the batteries first and replace them if necessary.
• For environmental reasons, do not dispose of the
device in household waste at the end of its service life. Dispose of the device at a suitable local
collection or recycling point in your country. Dispose of the device in accordance with EC Directive
– WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local
authorities responsible for waste disposal.
Disposing of the batteries
• The empty, completely flat batteries must be disposed of through specially designated collection boxes,
recycling points or electronics retailers. You are legally required to dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
11. Specifications
Type
Measurement method
Measurement range
Display accuracy
.
®
BM 81
Oscillometric, non-invasive blood pressure measurement on the
upper arm
Cuff pressure 0 – 300 mmHg,
systolic 50 – 250 mmHg,
diastolic 30 – 200 mmHg,
Pulse 40 –180 beats/minute
Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Solution
Please take another measurement to check whether the
cuff can be correctly inflated.
Make sure that neither your arm nor other heavy objects
are pressing on the line, and that the line is not bent.
Insert new batteries into the device.
Please observe the information in chapter "Transfer of
measurements via Bluetooth
31
".
®

Publicité

loading