Additional Functions; Setup - Device Settings - VOLTCRAFT VC-590OLED SE Mode D'emploi

10. Additional functions

The following additional functions can be used to make device settings or use special measuring
features.
a) SETUP - device settings
The DMM allows you to set the power-off time (0-30 minutes) for the automatic power-off
function (APO) and the brightness of the OLED display (0-100%).
Automatic power-off "APO"
In case of user inactivity, the DMM turns off automatically after the set time. This feature protects
and conserves the batteries and thus lengthens the operating time.
To turn the DMM back on after automatic power-off, press any key or turn the rotary switch past
"OFF". The device will turn back on in approx. 1-2 seconds.
Proceed as follows to set the power-off time:
- Push and hold the SETUP key for approx. 2 seconds.
- The display shows the setup windows "SETUP 1 APO TIME" for
automatic power-off.
- Use the MAX MIN key (8) to increase the value in 1 minute intervals.
- Use the REL ZERO (11) key to decrease the value in
1 minute intervals. After the display shows "1m", the automatic
power-off feature is deactivated. The display shows "OFF". In normal
measurement mode, the symbol "APO" is not active when APO is
deactivated and the device does not turn off automatically.
- To exit the settings menu, push and hold the SETUP key for approx. 2 seconds. The display
returns to measuring operation.
63