Display Elements And Symbols - VOLTCRAFT VC-590OLED SE Mode D'emploi

8. Display elements and symbols

The following symbols and indications are visible on the device or in the display.
AUTO
SETUP 1/2
APO
APO TIME
OFF
OLED BRIGHT %
NCV
True RMS
H
HOLD
MAXMIN
MAX
MIN
AVG
REL
ZERO
Δ
OL
50
Automatic range selection is active
Access device settings and display function 1 and 2
Automatic power-off is active
Power-off time in minutes (m)
Switch position off or function deactivated
Display brightness in percentage steps
Non-contact AC voltage detection (only V-AC)
True root mean square measurement
Data hold function is active
Go to/deactivate data hold function
MAX/MIN function is active
Display the maximum value of the current measurement series
Display the minimum value of the current measurement series
Display the average value of the current measurement series
Go to relative value measurement and set relative value (not possible for
DC and NCV)
Zero adjustment for DC measuring range (A-DC only)
Delta symbol for relative value measurement (= display relative value)
Overload indicator; the measuring range was exceeded
Battery charge state symbol for full batteries; number of bars reduced
with failing battery charge state. Replace the batteries immediately to
prevent measuring errors when no bars are left!
Symbol for used battery data
Symbol for diode test