Publicité
SPECIFICATIONS
ENGINE
Briggs & Stratton
Make
Briggs & Stratton®
Model
Professional Series™
Displacement
44.2 cu in. (724 cc)
Electrical System
Alternator: 16 amp
Battery: 12 Volt, 230 CCA
Oil Capacity
62-64 oz (1,8-1,9 L)
Spark Plug Gap
0.030 in. (0,76 mm)
Spark Plug Torque
180 in-lbs (20 Nm)
CHASSIS
Fuel Tank Capacity
Capacity: 4.0 gal (15,1 L)
Rear Wheels
Tire Size: 23 x 10.5-12
Inflation Pressure: 6-8 psi (0,41-0,53 bar)
Front Wheels
Tire Size: 16 x 6.5-8
Inflation Pressure: 10-12 psi (0,8-1,0 bar)
TRANSMISSION
K66
Type
Hydrostatic Tuff Torq K66
Engine Oil
10w 30 Premium Engine Oil
Capacity
2.6 qt (2,5 L)
Speeds
Forward: 0-5.8 MPH (9.3 km/h)
@ 3400 rpm
Reverse: 0-3.5 MPH (5.6 km/h)
Continuous Torque
310 ft-lbs (419 Nm)
Output
Drawbar Rating
440 lbs (200 Kg)
Maximum Weight
697 lbs (316 Kg)
on Axle
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi-
neers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and cor-
rected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are
collected without these attachments. Actual gross engine power will be higher than net engine power and is affected by,
among other things, ambient operating conditions and engine-to-engine variability. Given the wide array of products on
which engines are placed, the gas engine may not develop the rated gross power when used in a given piece of power
equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components (air
cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (tem-
perature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Strat-
ton may substitute an engine of higher rated power for this Series engine.
PARTS AND ACCESSORIES
Contact an authorized dealer for details.
26
K664
Type
Hydrostatic Tuff Torq K664
Engine Oil
10w 50 Synthetic Engine Oil
Capacity
5.4 qt (5,1 L)
Speeds
Forward: 0-6.1 MPH (0-9,8 km/h)
@ 3400 rpm
Reverse: 0-3.0 MPH (0-4,8 km/h)
Continuous Torque
310 ft-lbs (419 Nm)
Output
Drawbar Rating
440 lbs (200 kg)
Maximum Weight
697 lbs (316 kg)
on Axle
MOWER
Width of Cut
52" (132 cm)
Number of Blades
3
Base Deck Platform
Side Discharge
Cutting Height
1.5 - 4.0 in. (3,8 - 10,2 cm)
Cutting Positions
Infinite
DIMENSIONS
Overall Length
Overall Width with Deflector
Overall Width without Deflector
Overall Height
Wheelbase
75.2" (191 cm)
65.7" (167 cm)
52.0" (132 cm)
46.9" (119 cm)
53.1" (135 cm)
www.simplicitymfg.com
Publicité
