Publicité
Les langues disponibles
Les langues disponibles
13. Remove the tank, fill with fresh water, and reposition in the
machine.
The machine is now ready for use.
12. EXPLANATION OF INDICATOR LIGHTS
LIGHTS
All lights blink briefly
permanently on
permanently on (white)
•
light: indicates the selected coffee
temperature
•
light: indicates the machine
is ready to deliver hot water
permanently on
permanently on
blinking
blinking momentarily at regular
intervals
permanently on
Please note:
•
•
EXPLANATION OF LIGHTS
Turning the machine on
The machine has been turned on for the
first time and the water circuit must be
filled
The machine is ready to deliver fluids
Energy saving is enabled
The beans container (A2)is empty
The grinding function has been se-
lected, but the beans container (A2) is
empty
The dial (B2) has been set to the MAX
adjustment
There is not enough water in the tank
(A14) or the tank is not correctly in place
26
The descaling cycle can be started up at any time (even if
the relative light has not yet come on).
Should descaling be started up by mistake, it can be
stopped by pressing the OK button and holding for 10 sec-
onds; the rinse cycle cannot be stopped.
OPERATION
Self-diagnosis
Proceed as indicated in section "3. Setting up
the appliance"
Set up the machine and proceed with prepa-
ration of the beverage
Refer to section "7. Settings menu" for in-
structions on disabling the function
Fill the beans container
Fill the beans container
When the freshly ground coffee in the filter is
not sufficient, select a new grinding range as
indicated in section "6. Menù settings".
Fill the tank with water, or remove the tank
and reposition it correctly
→
Publicité
