Publicité
Les langues disponibles
Les langues disponibles
Before using the appliance, always read the safety warnings.
1. DESCRIPTION
1.1 Description of appliance - A
A1. Beans container lid
A2. Beans container
A3. Cup tray
A4. Steam dial
A5. Hot water spout
A6. Steam wand
A7. Cup grille for espresso
A8. Cup grille for glasses or mugs
A9. Drip tray grille
A10. Drip tray
A11. Drip tray water level indicator
A12. Water tank lid
A13. Water tank extraction handle
A14. Water tank
A15. Water softener filter housing
A16. Power cord connector socket
A17. Main switch (ON/OFF)
A18. Coffee spout
A19. Coffee mill outlet (tamping station)
A20. Presser lever
A21. Cover giving access to coffee mill funnel
1.2 Description of control panel - B
B1. ON/Standby button
B2. Ground coffee quantity dial
B3. "2x" button: selection of 2-coffee filter
B4. Coffee temperature button
B5. "OK" button: delivery of beverage/confirm
B6. Hot water button
B7. "My" button: customization of beverage quantity
B8. Function selector dial
• Espresso
• Americano
• Coffee
• Descale
B9. "Descale" light
B10. "Steam ready" light
B11. "No beans container" light
B12. "Energy saving" light
B13. "Clean" light (see "8.1 Cleaning of the coffee outlet")
B14. "Beans container empty" light
B15. "No water" light
B16. "Press" light
B17. Pressure gauge
1.3 Description of accessories - C
C1. Filter holder
C2. 1 cup filter
C3. 2 cup filter
C4. "Total Hardness Test" paper
C5. Descaler
C6. Removable power cord
C7. Tube brush
C8. Coffee outlet cleaning accessory
C9. Softballs
C10. Milk jug
C11. Steam wand cleaning needle
1.4 Optional cleaning accessories recommended
by the manufacturer
For more information, visit www.delonghi.com.
2. PREPARING THE APPLIANCE
Wash all accessories with warm water and washing-up liquid,
then proceed as follows:
1. Locate the beans container in the (A2) coffee mill (fig.
1).The container is correctly in place when the arrow ▲
aligns with the
2. Locate the drip tray (A10) together with the cup grille (A8)
and drip tray grille (A9) (fig. 3);
3. Take out the water tank (A14) (fig. 4) and fill with fresh
clean water, taking care not to exceed the MAX level (fig. 5).
4. Put the tank back in the appliance.
Important: Never operate the appliance without water in the tank or without the
tank.
Please note: You should customise water hardness as soon as possible following the
instructions in section "7. Settings menu".
3. SETTING UP THE APPLIANCE
1. Plug the power cord connector (C6) into the socket (A16) at
the back of the appliance (fig. 6), then plug into the mains
socket. Make sure the main switch (A17) at the back of the
appliance is pressed and in the I position (fig. 7);
2. Place a container of at least 100 ml capacity under the hot
water spout (next to the coffee spout (A18)) as illustrated
(fig. 8).
3. Press the button (B6) next to the
9): delivery will start and then stop automatically. Empty
the container.
Before using the coffee maker, the internal circuits of the ma-
chine must be rinsed. Proceed as follows:
4. Attach the filter holder (C1) complete with filter to the appli-
19
ance. To attach correctly, align the filter holder handle with
Cleaning tabs
(see "8.1 Cleaning the coffee outlet")
Cleaner
EAN: 8004399333307
symbol and a "click" is heard (fig. 2).
indicator light (fig.
Publicité
