Olivetti ECR 7200 Guide D'utilisation page 22

Fraction Rounding for VAT Calculation
Fraction rounding is used to round figures with decimals up
or down to the nearest whole numbers and is used for
percent tax calculations.
Choose from the following three options to select the
rounding as needed:
Status Number Fraction Rounding
0 a fraction of a pence is rounded down
one pence
1 a fraction under one-half pence is
rounded down one pence, a fraction
above one-half pence is rounded up
one pence (default setting)
2 a fraction of a pence is rounded up
one pence
1. Control key position: PRG.
2. Type system option
number [0, 1 or 2] to select the desired fraction rounding.
3. Press to store the new setting.
Example: Program the rounding code so that a fraction
under one-half pence is rounded down one pence, a
fraction above one-half pence is rounded up one pence.
Type/Press:
Printing VAT Information on Customer
Receipts
You can program the cash register to print VAT information
on the customer receipt according to your business' or
country's requirements.
Programming the Cash Register to Print the
Required VAT Information
With reference to the section "System Options", by setting
machine conditions 37, 38, 39, 40 and 41 you program the
cash register to print the VAT information that you need.
1. Control key position: PRG.
2. Type the [machine condition number] followed by
status number , then press
3. Slide the control key to the OFF position.
Receipt With Sum of all VAT Amounts Calculated
(TOTAL VAT) - Machine Condition 37
Programmed
VAT rates
10
followed by the status
.
VAT totals
per pro-
grammed
rate
Sum of the
individual VAT
totals
Receipt With Taxed Sales Totals Split per Rate
(AMT VAT INCL) - Machine Condition 38
Programmed
VAT rates
Receipt With Sum of the Taxed Sales Totals
(TOTAL INCL VAT) - Machine Condition 39
Programmed
VAT rates
Receipt with Taxable Sales Totals without VAT per each
Rate (AMT VAT EXCL) - Machine Condition 40
Programmed
VAT rates
Receipt With the Sum of the Taxable Sales Totals without
VAT (TOT EXCL VAT) - Machine Condition 41
Programmed
VAT rates
Calculator Mode
The calculator mode is a non-print mode that can only be
accessed in the REG or JRNL position.
The following keys can be used in the calculator mode:
Key
to
VAT totals
per pro-
grammed
rate
Taxed sales
totals per
rate
VAT totals
per pro-
grammed
rate
Sum of taxed
sales totals
VAT totals
per pro-
grammed
rate
Taxable
sales totals
without VAT
per each rate
VAT totals per
programmed
rate
Sum of the
taxable sales
totals without
VAT