Control Of Aduro H2; Faq - ADURO H2 Mode D'emploi

8.0 Control of Aduro H2

Aduro H2 has the following ALARM modes where pellet delivery must be stopped immediately:
SMOKE SENSOR: smoke sensor defect. SHAFT SENSOR: shaft sensor defect. TERMO: shaft sensor too
hot.
DOOR CONTACT: door open.
PELLET DAMPER: damper closed. EXIT: defect exit for external snail.
FUEL: smoke temperature too low after more than an hour of operation – no fuel?
LIGHTING: smoke temperature not reached after two attempts to light the fire. CO: CO (carbon monoxide)
level is too high.
Here the ALARM will be red.
When the cause of alarm has been rectified, the stove can be started by pushing ON/OFF twice.
The development within phones and electronics continuously provides new possibilities and demands for
updates and development of the app. When you buy an Aduro Hybrid stove, updates of the app and control
is included 5 years after purchase. After this, charges may apply for updates.

9.0 FAQ

If you need more information, please go to www.adurofire.com.
Enjoy your stove!
57