RIB NO TOUCH 868 Manuel page 29

MASTER NO TOUCH 868 CONNECTIONS TO A CONTROL PANEL WITHOUT AN OUTPUT TO SUPPLY A BLINKER
FOR CONTROL PANEL ABLE TO MANAGE A 12/24Vdc MOTOR
- It is not possible to connect directly MASTER NO TOUCH 868 to the motor power supply output of the control panel because polarities are exchanged in opening and closing and control panel
has slow speed in approaching which is not possible to disengage.
* R1 = RELAY WITH 1 CONTACT AND 120/230Vac BOBINE
CONNECT J4 TO ACCESSORIES POWER SUPPLY LINE 12/24V ON CONTROL PANEL THOUGHT 1
CONTACT RELAY WITH 12/24V BOBINE MANAGED BY A N.O. COURTESY LIGHT OUTPUT CLEAN
CONTACT ON CONTROL PANEL
* R1 = RELAY WITH 1 CONTACT AND 12/24V BOBINE
+ -
24Vdc COURTESY LIGHT POWER SUPPLY OUTPUTS
TERMINAL BLOCKS ON CONTROL PANEL
CONNECT J2 TO POWER SUPPLY LINE 120/230V ON CONTROL PANEL
THOUGHT 1 CONTACT RELAY WITH 120/230V BOBINE MANAGED BY A
N.O. COURTESY LIGHT OUTPUT CLEAN CONTACT ON CONTROL PANEL
*R1
*R1 N.O. N.O.
COURTESY LIGHT TERMINAL
BLOCKS
N.O. CLEAN CONTACT
ON CONTROL PANEL
29
N.O.
N.O.
F
POWER SUPPLY LINE
N
120/230Vac
-
+
ACCESSORIES
POWER SUPPLY 12/24V
TERMINAL BLOCKS ON
CONTROL PANEL
G
B