Secondary Heating Connection (Dwelling Heating Circuit); Sanitary Connection - meibes LogoPack C Mode D'emploi

5.2 Secondary heating connection (dwelling heating circuit)

1. Remove ball valve (C) from the station and connect it to the supply
line of the dwelling heating circuit, ensuring that no voltage is being
supplied.
2. Connect the return line of the dwelling heating circuit to transition
nipple (d), ensuring that no voltage is being supplied.

5.3 Sanitary connection

1. Connect the cold water connection from the line or the apartment connection to the cold water connecting piece (F) of the PF controller,
ensuring that no voltage is being supplied (use a flat sealing screw fitting).
Details: Hot water throttle plate
2. Connect the hot water supply line to the apartment to the angle
piece (E), ensuring that no voltage is being supplied.
Do not forget the hot water throttle plate (G)!
23