Malaguti centro 125 ie Manuel D'entretien Et D'utilisation page 137

5.14.3 TAIL LAMP (WITH STOP LIGHT)
• Parking light (B-Fig.38)
• Stop light (S-Fig.38)
• Rear turn indicator (E-Fig.38)
Note: visually check if the stop light works properly,
by pulling one of the two brake levers.
V
E
P
W
S
B
All manuals and user guides at all-guides.com
REPLACING LAMPS
• Remove number plate light (see par.5.14.1).
• Remove cover of tail light (F-Fig.38) by loosening the
• Remove the parabola (P-Fig.38) by loosening the 2
Parking light (B-Fig.39)
• Remove the lamp socket inside the lamp.
• Replace the light bulb.
Stop light (S-Fig.40) and turn indicator (E-Fig.40)
• Remove the coloured cap, secured to the lamp by
F
• Replace the light bulb.
V
W
Fig.38
2 screws (V-Fig.38). Pay attention not to scratch the
cover.
screws (W-Fig.38).
cover.
means of two hooks.
When performing the operations described
above, pay attention not to damage parts nearby
(transmission, wiring, gaskets, etc.)
B
Fig.39
S
E
Fig.40
39
1
2
3
4
5
6
ENG