Malaguti centro 125 ie Manuel D'entretien Et D'utilisation page 133

5.9 ADJUSTING REAR SHOCK ABSORBERS
• The shock absorbers are equipped with a spring
preload ring nut, with which it is possible to adjust the
vehicle's behaviour depending on the load carried,
how the vehicle is driven and where.
• The adjustment is carried out using the wrench
supplied, by acting on the ring nut located in the
top section of the shock absorbers (R-Fig.32); turn
anti clockwise to increase spring pre-load (load
increase).
1) light-weight driver only (up to 75 kg)
2) driver only
3) driver and luggage case
4) driver and passenger
5) driver, passenger and luggage case
All manuals and user guides at all-guides.com
5.10 ADJUSTING ENGINE IDLING SPEED
5.11 THROTTLE FREE PLAY ADJUSTMENT
Check that the throttle grip idle stroke is 1-3 mm
(measured on the end of the throttle grip).
R
Fig.32
ATTENTION: adjust both
according to the same adjustment index. An
unbalanced adjustment may compromise the
vehicle's stability.
While riding with a passenger, preload the shock
absorber spring at position '4'.
When adjusting, wear gloves to protect yourself
against scratching.
For possible adjustments, please contact an
Authorised MALAGUTI Service Centre.
Any adjustments must be entrusted to an
Authorised MALAGUTI Service Centre.
shock absorbers
1
2
3
4
5
6
ENG
35