Briggs & Stratton 1696828 Manuel De L'utilisateur page 10

NOTICE Do not overload the machine capacity by attempting
to clear snow at too fast of a rate.
Using the Steering Feature
This model is equipped with a steering feature. A small trigger
under each hand grip controls the steering of the machine.
1. Engage the traction control lever (A, Figure 7) to move the
machine forward.
2. Pull up on the left trigger (B), to turn left.
3. Release the left trigger, to continue straight.
4. Pull up on the right trigger (C), to turn right.
5. Release the right trigger, to continue straight.
7
Using Free Hand™ Feature
Some models are equipped with the Free Hand™ feature, which
allows the operator to release the auger control to reach other
controls without stopping the unit. If your model is equipped
with Free Hand, it will have the decal shown in Figure 8 affixed
to the dash panel.
10
8
9
1. Press down and hold the auger control (A, Figure 9).
2. Press down and hold the traction control (B).
3. Release the auger control so the left hand is free to reach
other controls.
• If the auger stops, see an authorized dealer.
Note: Free Hand cannot be actuated by releasing the traction
control.