Adjusting The Volume; Muting The Sound - Yamaha YSP-1100 Mode D'emploi

Adjusting the volume

+ +
INPUT VOLUME STANDBY/ON
VOLUME
MUTE
Press VOLUME +/– on the front panel or on the
remote control to increase or decrease the
volume level.
The numeric value of the volume level appears in the front
panel display.
Control range: MIN (minimum), 01 to 99,
MAX (maximum)
+ +
VOLUME
Front panel
Notes
• The volume level of all input sources (including multi-channel
as well as stereo sources) changes at the same time.
• One of the volume level increases or decreases each time you
press VOLUME +/–.
• You can continuously increase or decrease the volume level if
you press and hold VOLUME +/–.
CH TV VOL
TV INPUT TV MUTE
CODE SET
VOLUME
or
Remote control
VOL

Muting the sound

VOLUME
MUTE TV INPUT
1
Press MUTE on the remote control to mute
the sound.
AUDIO MUTE ON appears in the front panel
display, and the volume level indicator flashes.
2
Press MUTE on the remote control again (or
press VOLUME +/–) to resume the sound
output.
AUDIO MUTE OFF appears temporarily in the front
panel display (or the numeric value of the current
volume level appears if you press VOLUME +/–),
and the volume level indicator lights up.
MUTE
Note
The sound output of all input sources (including multi-channel as
well as stereo sources) is muted at the same time.
y
You can select whether the sound output is to be muted
completely or by 20 dB when you press MUTE (see page 67).
PLAYBACK
CH TV VOL
TV MUTE
CODE SET
MUTE
VOL
Flashes
VOL
VOLUME
or
Lights up
VOL
41
En