Wohler FA 320 Mode D'emploi page 19

Mx/Mn
▲
REC
START
HOLD
▼
3.2.1 Power
Press to turn on and off the meter.
When the meter is off, press the POWER key more than two seconds to enter the
unit selection.
3.2.2 MODE
Press the MODE key to select the different modes (temperature – dew point – wet
bulb – relative humidity - velocity).
3.2.3 ENTER
Press ENTER to confirm the setting and calibration.
3.2.4 Mx/Mn, UP,'
Show the maximum, minimum and the average value
Raise the value when setting the area (see chapter. 3.4.1)
Show the total volume flow of all controlled installations
(see chapter. 3.4.2).
Save the current values (in flow speed mode)
Start volume flow measurement (see chapter 3.4.2)
1. press: hold the current value
2. press: return to normal measurement mode
Decrease the value when setting the area (vgl. Kap. 3.4.1)
e-Mail: mgkg@woehler.de
Wöhler FA 320
http://mgkg.woehler.de 19