Reissuing Leckey Products; Product Servicing - Leckey MyWay Mode D'emploi

15.0 Re-issuing Leckey Products
Most Leckey products are
assessed and ordered
to meet the needs of an
individual user. Before
reissuing a product we
recommend that the
therapist prescribing the
product has carried out an
equipment compatibility
check for the new user
and has ensured that the
product being re-issued
contains no modifications
or special attachments.

16.0 Product Servicing

Servicing of all Leckey
products should only be
carried out by technically
competent persons who
have been trained in the
use of the product.
A detailed technical
inspection should be carried
out on the product prior to
re-issuing. This should be
carried out by a technically
competent person who has
been trained in the use and
inspection of the product.
Please refer to section 14
'Annual Product Inspection'
for the required checks to
be carried out.
Ensure the product has
been cleaned thoroughly
in accordance with section
12 'Cleaning and Care
Information' of this manual.
In the UK & ROI please contact
the Leckey Service Centre on
+44 (0) 2892 600750 and our
Customer Care Team will be
delighted to assist you with
your servicing requirements.
MyWay User Manual
Ensure a copy of the user
manual is supplied with
the product. A copy can
be downloaded from our
website www.leckey.com.
Leckey recommend that a
written record is maintained
of all product inspections
carried out during the
reissue of the product.
Warning – If in any doubt
to the continued safe use
of your Leckey product or if
any parts should fail, please
cease using the product and
contact our Customer Care
team or your local dealer as
soon as possible.
All international service
enquiries should be directed
to the appropriate Leckey
distributor who will be
delighted to assist you.
For further information on
Leckey distributors please
visit our website
www.leckey.com.
p.41