Harness Set-Up/Features - Leckey MyWay Mode D'emploi

p.18 MyWay User Manual

9.0 Harness Set-Up/Features

Warning – a risk assessment should be carried out
to ensure that the correct size of harness is used.
9.1 Preparing the Harness
• Lie the harness out flat
(with coloured buckles
facing upwards) on a
flat surface e.g. plinth.
The harness should be
opened to its furthest point
by releasing the corset pull
at the centre back.
• The stripe belt strap can
be folded back and
fastened onto the
Velcro- this holds the belt
in place and ensures there
are no obstructions when
donning the harness.
• Turn the harness over
(the coloured inside should
be facing upwards) and
ensure the groin straps
are lying out straight.
The harness is now
ready to use.