Leckey MyWay Mode D'emploi page 16

p.16 MyWay User Manual
8.13 Upper Support Unit Adjustments | Adjustment of the Harness Connection Points
• Once the child is in the
frame and the harness has
been attached to the upper
support unit by the buckles
(see section 9.5 'Attaching
the harness to the frame'),
pull each pulley strap to
adjust the buckle straps and
pull the child/harness closer
to the frame.
• If the frame is at a low
height and the pulley straps
are hanging down, you can
attach them to the clips at
the bottom of the frame-
this ensures the straps are
out of the way.
If you are using the product
with a larger child and the
buckles do not need much
adjustment, the straps may
hang at a height where
it isn't possible to attach
them to the bottom of the
frame- this is not a cause for
concern, the straps do not
need to be clipped up if
they are not in the way.
Warning – Only pull the pulley straps by placing
hands in the loops- do not use feet.
When attaching the harness to the frame,
ensure all four connection points are attached.
Note – a fair amount of force is required to pull the pulley straps.
If you find adjustment challenging, ask the user if they can support
some of their weight if possible, or support the user using a hoist.